Aftermarket Parts (Upgrades)
Note: There were other aftermarket parts made for the PGP, but they are no longer available, so I am not going to list them here. If you wish to have more info about those, please PM me.
Velocity Adjuster – Another must have upgrade. Drill and tap rear cap for a 3/8-24 allen screw, or adjust by removing the rear cap (the rear grip screw holds it in place) and either using small washers available from a hardware store to shim it to raise velocity, or cut a coil off of the spring if you need to lower the velocity. Obviously, the adjuster is a better choice. Any machine shop should be able to do it in about 5 minutes…so it shouldn’t cost too much.
Speed Loader – Available at Mad Custom.
Pusher Bolt – Cooper-T
SKU PGP 4000 E-Z Pull — $24.95
Hiviz Hiviz 7/8in Gun Sight
Nasty pump – from Cooper-T, if you have sweaty Hands, maybe this is the way to go.
Trigger Shoe – Makes the trigger feels much more comfortable in hand. Available at Palmer’s Pursuit Shop. and other places. *AutoCocker trigger shoe will work too.
Grips – PMI rubber grips are available at Palmer’s Pursuit Shop.
I also highly recommend Shartley’s Custom Wood Grips.
45 frame – Available at Palmer’s Pursuit Shop.
Modified Cocker frame
Rainman229 offer this service for a very reasonale price.
Send him the frame you like to use, and he will modify it for you.
Check out his site at http://www.rainman229.com/other.shtml
Stock Sheridan Parts – Parts like Safety BB, Spring…. Get them from Mad Custom
Shoulder Stock – A shoulder Stock can help you to aim easier, there are 3 ways to add a stcok on PGP.
1. Universial Mount Bracket available at Palmer’s Pursuit Shop will let you add your choice of bottom line stock on.
2. Wedge Stock available at Palmer’s Pursuit Shop.
3. Order a custom wooden stock from Shartley’s Custom.
Scarecrow’s Custom also offer lots Sheridan Upgrade Parts and do custom work on them, make sure you check out his web site.
Direct Feed, Spring Feed, Cigar Tube Mod Conversion – Available at Custom Shops.
Semi-automatic conversion – Available at Custom Shops.
Cosmetic options – Nickel Plating, Painting/airbrushing, Powder coating, Polishing options are available at Custom Shops.
Quik Strip Slot – Allow you to remove the bolt without any tool, just pull off the pump rod, twist the bolt and pull. Lighting fast. This serivce is available at Custom Shops.
Milling – Ball counter slots, Gills options are available at Custom Shops.
I’m looking for a holster that can hold my gun and a few CO2 cartridges and ammo refills. Does anyone have any suggestions?
I am sure You can find nice one for yourself from Cops911.